Wednesday, February 07, 2007
Monday, March 20, 2006
Evans VP1 Reg G-BAAD
The Evans VP1 was designed in California by Bud Evans as a simple to build light aircraft at low cost, available to the man in the street, the prototype first flying in 1969.
G-BAAD was built by Richard Husband and completed in 1973, with its first flight in February, winning the PFA Air Squadron Trophy in that year. G-BAAD cost £500 in total and was constructed over a 2 year period. Originally flown at Netherthorpe airfield, it was initially fitted with what was thought to be a Continental engine A40, but had an unusual Czech imported engine fitted – a 45 HP Persey II. This was replaced in 1989 with a VW 1600 cc engine rated at 40 HP at 3200 rpm. The current 1835 cc VW engine was fitted in January 2003. This gives the aircraft a much needed extra power and an increase rate of climb from around 300 fpm to 500 fpm.
The aircraft is maintained on a “Permit to Fly” which allows the group members to carry out all our own repairs under the guidance of a PFA inspector. This allows the aircraft to be run with the lowest possible cost. This aircraft is non-aerobatic, i.e. loops, flick rolls, spinning are strictly prohibited.
Technical Details
Max all up weight 748 lbs
Aircraft weight 540 lbs
Take off speed 45 to 50 knots
Cruise speed 50 to 60 knots
Approach speed 50 knots
Stall speed 30 knots
VNE 100 knots
Fuel capacity 6.5 Gallons
Best glide [engine off] 60 knots
Friday, March 17, 2006
Evans VP1 G-BAAD Shares

A great way to keep cool in summer whilst enjoying low cost flying. This is an ideal way of building hours towards a commercial license for very little cash. Many of our group have gone down this route before doing an ATPL or CPL.
The aircraft syndicate is based 1/8th shares and are occasionally available for sale at £500 ono.
Your piloting skills should be PPL SEP [or higher] 100 hrs P1 and 15 hours recent tailwheel experience.
Operational cost work out at approx. £10 per hour for fuel.
The aircraft is fitted with a 1835cc VW engine and
If you want to be consider any future share sales please contact Cliff Whitwell at cliff_whitwell@hotmail.com
This is a great way to hour build at low cost whilst having fun.